Avalue ECM-PNV User Manual

Part No. E2047383004R ECM-PNV (for Rev. C1 – Onboard 18bit LVDS) Intel® Atom™ D525 Dual-Core 3.5” Micro Mod

ECM-PNV 10 ECM-PNV User’s Manual 1.4 Manual Objectives This manual describes in detail the Avalue Technology ECM-PNV Single Board. We have tri

User’s Manual ECM-PNV User’s Manual 11 1.5 System Specifications System CPU Intel® Atom™ D525 Dual-Core 1.8GHz CPU FSB 800MHz BIOS AMI 8Mb

ECM-PNV 12 ECM-PNV User’s Manual Size ( L x W ) 5.7" x 4" (146mm x 101mm) Weight 0.44lbs (0.2kg)

User’s Manual ECM-PNV User’s Manual 13 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main com

ECM-PNV 14 ECM-PNV User’s Manual 2. Hardware Configuration

User’s Manual ECM-PNV User’s Manual 15 2.1 Product Overview

ECM-PNV 16 ECM-PNV User’s Manual 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the

User’s Manual ECM-PNV User’s Manual 17 2.2.1 Main Memory ECM-PNV provides one 204-pin SODIMM socket support up to DDR3 800 SDRAM. The total maxi

ECM-PNV 18 ECM-PNV User’s Manual  Locate the SODIMM socket on the board.  Hold two edges of the SODIMM module carefully. Keep away of touching it

User’s Manual ECM-PNV User’s Manual 19 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setti

ECM-PNV 2 ECM-PNV User’s Manual FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDIT

ECM-PNV 20 ECM-PNV User’s Manual Connectors Label Function Note BAT Battery connector 2 x 1 wafer, pitch 1.25 mm COM1 Serial port 1 connector D-su

User’s Manual ECM-PNV User’s Manual 21 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT) * Default Protect* Clear CMOS 2.4.2 Ser

ECM-PNV 22 ECM-PNV User’s Manual 2.4.3 Touch panel mode select (JTOUCH_SEL) * Default 4/ 8W 5W* 2.4.4 Miscellaneous setting connector (JFP) *

User’s Manual ECM-PNV User’s Manual 23 2.4.5 LCD backlight brightness adjustment (JVR) *Default Signal PIN PIN Signal +5V 1 2 INV_DA VR 3

ECM-PNV 24 ECM-PNV User’s Manual 2.4.6 5VSB connector in ATX (PWR_SB) Signal PIN ATX5VSB 3 GND 2 PSON 1

User’s Manual ECM-PNV User’s Manual 25 2.4.6.1 Signal Description –AT/ATX mode & Input power type Input power type Power-ON Mode Descripti

ECM-PNV 26 ECM-PNV User’s Manual 2.4.7 Battery connector (BAT) Signal PIN BAT 1 GND 2 2.4.8 CPU fan connector (CPU_FAN) Signal PIN GND

User’s Manual ECM-PNV User’s Manual 27 2.4.9 Serial port 2 in RS-422/485 mode (J422/485_1) J422/485_1 Signal PIN PIN Signal TX- 1 2 RX- TX+

ECM-PNV 28 ECM-PNV User’s Manual 2.4.10 Audio connector (JAUDIO) Signal PIN PIN Signal LINEOUT_R 1 2 LINEOUT_L GND 3 4 GND LINEIN_R 5 6 LINEIN_L

User’s Manual ECM-PNV User’s Manual 29 2.4.12 General purpose I/O connector (JDIO) Signal PIN PIN Signal DIO0 1 2 DIO10 DIO1 3 4 DIO11 DIO2 5

User’s Manual ECM-PNV User’s Manual 3 these products are free from patent, copyright, or mask work right infringement, unless otherwis

ECM-PNV 30 ECM-PNV User’s Manual 2.4.13 Touch panel connector (JTOUCH) PIN 4-WIRE 5-WIRE 8-WIRE 1 N/A N/A Right Sense 2 N/A N/A Left Sense 3 N/A

User’s Manual ECM-PNV User’s Manual 31 2.4.15 USB connector (JUSB2/ JUSB3) Signal PIN PIN Signal USBVCC 1 2 GND N3/ N7 3 4 GND P3/ P7 5 6 P2/

ECM-PNV 32 ECM-PNV User’s Manual 2.4.17 LCD Inverter Connector (JBKL) JBKL Signal PIN +12V 1 GND 2 BLK_ON 3 BRIGHT 4 +5V 5 Note: For inve

User’s Manual ECM-PNV User’s Manual 33 2.4.18 Power connector (PWR) Signal PIN PIN Signal GND 2 4 VIN GND 1 3 VIN 2.4.19 SATA power connec

ECM-PNV 34 ECM-PNV User’s Manual 2.5 Audio / USB Daughter Board User’s Guide 2.5.1 Jumper and Connector Layout 2.5.2 Jumper and Connector List

User’s Manual ECM-PNV User’s Manual 35 2.5.3 Setting Jumper and Connector Audio Connector (JAUDIO) 2.54mm USB Connector (JP1) Signal PIN PIN S

ECM-PNV 36 ECM-PNV User’s Manual 3. BIOS Setup

User’s Manual ECM-PNV User’s Manual 37 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this fol

ECM-PNV 38 ECM-PNV User’s Manual 3.3 Using Setup In general, you use the arrow keys to highlight items, press <Enter> to select, u

User’s Manual ECM-PNV User’s Manual 39 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and th

ECM-PNV 4 ECM-PNV User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects

ECM-PNV 40 ECM-PNV User’s Manual 3.6 BIOS setup Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the scr

User’s Manual ECM-PNV User’s Manual 41 3.6.2 Advanced BIOS settings This section allows you to configure your CPU and other system devices for b

ECM-PNV 42 ECM-PNV User’s Manual 3.6.2.1 Configure advanced CPU settings Use the CPU configuration menu to view detailed CPU specification and con

User’s Manual ECM-PNV User’s Manual 43 Intel ® SpeedStep ™ tech Disabled, Enabled This item allows you to enable or disable Intel ® SpeedStep ™

ECM-PNV 44 ECM-PNV User’s Manual 3.6.2.2 IDE Configuration Item Options Description ATA/ IDE Configuration Disabled, Compatible, Enhanced This ca

User’s Manual ECM-PNV User’s Manual 45 IDE Detect Time Out (Sec) 0/ 5/ 10/ 15/ 20/ 25/ 30/ 35 This allows you to select the time out value for de

ECM-PNV 46 ECM-PNV User’s Manual 3.6.2.4 Hardware Health Configuration This section shows the operating temperature, fan speed and system voltage.

User’s Manual ECM-PNV User’s Manual 47 3.6.2.5 ACPI Settings The ACPI Configuration menu configures Advanced Configuration and Power Interface

ECM-PNV 48 ECM-PNV User’s Manual 3.6.2.5.1 General ACPI settings Use this option to select the ACPI state when the system is suspended. Item

User’s Manual ECM-PNV User’s Manual 49 3.6.2.5.2 Advanced ACPI Configuration Use this menu to select ACPI state when system is suspended.

User’s Manual ECM-PNV User’s Manual 5 Contents 1. Getting Started ...

ECM-PNV 50 ECM-PNV User’s Manual 3.6.2.5.3 South Bridge ACPI configuration Use the South Bridge ACPI Configuration menu to select the ACPI state

User’s Manual ECM-PNV User’s Manual 51 3.6.2.6 AHCI Configuration This option is a system memory structure for data exchange between host syste

ECM-PNV 52 ECM-PNV User’s Manual 3.6.2.6.1 AHCI Port0 This option helps select the type of connected device Item Options Description SATA Por

User’s Manual ECM-PNV User’s Manual 53 3.6.2.6.2 AHCI Port1 This option helps select the type of connected device Item Options Description

ECM-PNV 54 ECM-PNV User’s Manual 3.6.2.6.3 AHCI Port2 This option helps select the type of connected device Item Options Description SATA Por

User’s Manual ECM-PNV User’s Manual 55 3.6.2.7 USB configuration Use the USB Configuration menu to read USB information and configure settings.

ECM-PNV 56 ECM-PNV User’s Manual 3.6.2.7.1 USB mass storage configuration This Screen appears if a USB drive is connected to one of the USB ports

User’s Manual ECM-PNV User’s Manual 57 3.6.2.8 APM configuration The APM menu configures the advanced power management options. Item Options

ECM-PNV 58 ECM-PNV User’s Manual 3.6.3 Advanced PCIPnP Settings The settings in this section specifically deal with the PCI bus and Plug and Play

User’s Manual ECM-PNV User’s Manual 59 Item Options Description Clear NVRAM [No] No (DEFAULT) Yes Set this value to force the BIOS clear Non-vola

ECM-PNV 6 ECM-PNV User’s Manual 2.5.3 Setting Jumper and Connector ...

ECM-PNV 60 ECM-PNV User’s Manual 3.6.4 Boot settings Use the Boot menu to configure system boot options.

User’s Manual ECM-PNV User’s Manual 61 3.6.4.1 Boot settings configuration Use Boot Settings Configuration menu to configure advanced boot optio

ECM-PNV 62 ECM-PNV User’s Manual 3.6.4.2 Boot device Priority Use the Boot Device Priority to specify the boot sequence from the available devices.

User’s Manual ECM-PNV User’s Manual 63 3.6.4.4 Removable Drives This option specifies boot sequence from the available devices 3.6.5 Securi

ECM-PNV 64 ECM-PNV User’s Manual Change Supervisor / User Password Use the Change User/ Supervisor Password to set or change a User/supervisor pass

User’s Manual ECM-PNV User’s Manual 65 3.6.6.1 North bridge Chipset configuration Use the Northbridge chipset configuration menu to configure t

ECM-PNV 66 ECM-PNV User’s Manual 3.6.6.2 Video Function configuration Use this menu to configure Video display and LCD backlight.

User’s Manual ECM-PNV User’s Manual 67 Item Option Description DVMT Mode Select Fixed Mode, DVMT Mode Displays the active system memory mode. D

ECM-PNV 68 ECM-PNV User’s Manual 3.6.6.3 South bridge Chipset configuration Use the Southbridge chipset configuration menu to configure Southbridge

User’s Manual ECM-PNV User’s Manual 69 3.6.7 Exit Options Use the Exit menu to load default BIOS values, optional failsafe values and to save ch

User’s Manual ECM-PNV User’s Manual 7 3.6.7.2 Discard Changes and Exit ...

ECM-PNV 70 ECM-PNV User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in t

User’s Manual ECM-PNV User’s Manual 71 4.1. Install Chipset Driver (For Intel ICH8M) Insert the Supporting DVD-ROM to DVD-ROM drive, and it sho

ECM-PNV 72 ECM-PNV User’s Manual 4.2 Install Display Driver (For Intel Pineview) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should sho

User’s Manual ECM-PNV User’s Manual 73 4.3 Install Audio Driver (For Realtek ALC888) Insert the Supporting CD-ROM to CD-ROM drive, and it shoul

ECM-PNV 74 ECM-PNV User’s Manual 4.4 Install Ethernet Driver (For Intel 82574L) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show

User’s Manual ECM-PNV User’s Manual 75 Step 6. Installing… Step 7. Click Finish to complete the setup

ECM-PNV 76 ECM-PNV User’s Manual 5. Mechanical Drawing

User’s Manual ECM-PNV User’s Manual 77 Unit: mm

ECM-PNV 8 ECM-PNV User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconne

User’s Manual ECM-PNV User’s Manual 9 1.3 Document Amendment History Revision Date Comment 1st January 2011 Initial Release 2nd August 2013